Make
BREVINI
Model
In-line & right angle EC..FP, ED..FP, EM..FP, EQ..FP, ET..FP (Planetary Gear Units)
Bearings & Gears (-20°C ... 5°C)

Recommendation

1st Choice We could not find a product that met the requirements. In order to obtain a recommendation, please contact the Technical Department.

Oil Change Intervals

Months Max 12
Hours Max 2500

Notes

  • a. Manufacturer's specification; Minimum VI 95 for mineral oils, 165 for synthetic oils. Recommended viscosity 40 cSt to 60 cSt at working temperature. Working temperatures should not exceed 90°C. Capacities vary according to mounting position. Check application for seal compatibility when using synthetics
Bearings & Gears (5°C ... 30°C)

Recommendation

1st Choice We could not find a product that met the requirements. In order to obtain a recommendation, please contact the Technical Department.

Oil Change Intervals

Months Max 12
Hours Max 2500

Notes

  • a. Manufacturer's specification; Minimum VI 95 for mineral oils, 165 for synthetic oils. Recommended viscosity 40 cSt to 60 cSt at working temperature. Working temperatures should not exceed 90°C. Capacities vary according to mounting position. Check application for seal compatibility when using synthetics
Bearings & Gears (30°C ... 50°C)

Recommendation

1st Choice We could not find a product that met the requirements. In order to obtain a recommendation, please contact the Technical Department.

Oil Change Intervals

Months Max 12
Hours Max 2500

Notes

  • a. Manufacturer's specification; Minimum VI 95 for mineral oils, 165 for synthetic oils. Recommended viscosity 40 cSt to 60 cSt at working temperature. Working temperatures should not exceed 90°C. Capacities vary according to mounting position. Check application for seal compatibility when using synthetics
Bearings & Gears (-30°C ... 65°C)

Recommendation

1st Choice We could not find a product that met the requirements. In order to obtain a recommendation, please contact the Technical Department.

Oil Change Intervals

Months Max 12
Hours Max 2500

Notes

  • a. Manufacturer's specification; Minimum VI 95 for mineral oils, 165 for synthetic oils. Recommended viscosity 40 cSt to 60 cSt at working temperature. Working temperatures should not exceed 90°C. Capacities vary according to mounting position. Check application for seal compatibility when using synthetics
  • b. Alternative recommendations: We could not find a product that met the requirements. In order to obtain a recommendation, please contact the Technical Department.
Multi-disk Brake

Recommendation

1st Choice We could not find a product that met the requirements. In order to obtain a recommendation, please contact the Technical Department.